Lambroken

If you're having a problem with your scoot, drop us a line!

Moderator: Tuna Cowboy

Lambroken

Postby joe » Sun Apr 01, 2012 7:49 pm

user error. holed piston. upgrades loom.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby spiderwebb » Sun Apr 01, 2012 8:19 pm

did you already take off the top end...??

that was fast...!!

lets go drop off our clogged up exhaust...
:P :P

http://scoot.net/classifieds/forsale.html?id=35095
User avatar
spiderwebb
 
Posts: 2661
Joined: Fri May 25, 2007 3:15 pm
Location: Eugene, OR

Re: Lambroken

Postby joe » Mon Apr 02, 2012 9:05 pm

I am ready to dip the exhaust when you are.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby spiderwebb » Thu May 10, 2012 4:13 pm

dropped off our 2 exhausts...
40 bucks each with a small environmental charge

should take 5 days he said = two days in each tank

be ready to prime and paint them so yours don't flash rust when I drop it off at your house
User avatar
spiderwebb
 
Posts: 2661
Joined: Fri May 25, 2007 3:15 pm
Location: Eugene, OR

Re: Lambroken

Postby joe » Thu May 10, 2012 6:18 pm

spiderwebb wrote:dropped off our 2 exhausts...
40 bucks each with a small environmental charge

should take 5 days he said = two days in each tank

be ready to prime and paint them so yours don't flash rust when I drop it off at your house


cool, I wish I could have weighed mine before. forgot. anyway, I plan to fit this exhaust on when I rebuild the top end.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby spiderwebb » Thu May 10, 2012 7:55 pm

yours was about 2 pounds heavier than mine...
we should be able to wind out to a higher rpm I bet...!!

I was @ WOT almost the whole time during Mayday and barley could keep yall in my sight = 50 - 55mph max
not bad for stock 150cc porting from 1970

love the variable ignition curve...!!
User avatar
spiderwebb
 
Posts: 2661
Joined: Fri May 25, 2007 3:15 pm
Location: Eugene, OR

Re: Lambroken

Postby joe » Thu May 10, 2012 8:35 pm

The mighty LI will be back on the road soon. It's coming after that DL. Watch out.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby joe » Thu May 31, 2012 9:17 pm

fired the bike up tonight, to my surprise :shock:

figured the piston is OK, probably just a blown head gasket. :)
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby joe » Thu May 31, 2012 10:19 pm

got everything removed but the shock and bump. do that sunday. Will, I can use your help there. bring the piston tool too, just in case.

muffler seems to be in good shape. :)

I hope to have it back into service next week!
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby spiderwebb » Thu May 31, 2012 10:43 pm

I'll bring the piston grudgen tool...

I have a pals kids 1st B-Day thing on sunday @ 5 - 8pm
Would you like some help before that or after...??
3 or 9pm
User avatar
spiderwebb
 
Posts: 2661
Joined: Fri May 25, 2007 3:15 pm
Location: Eugene, OR

Re: Lambroken

Postby joe » Thu May 31, 2012 10:54 pm

spiderwebb wrote:I'll bring the piston grudgen tool...

I have a pals kids 1st B-Day thing on sunday @ 5 - 8pm
Would you like some help before that or after...??
3 or 9pm


three sounds good.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby joe » Thu May 31, 2012 10:56 pm

nobody has rings. fuck. I believe I need the 57x2.0. Jet200 and S.O. are out of stock. I really don't want to go through LW, but I might have no choice.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Lambroken

Postby Tuna Cowboy » Fri Jun 01, 2012 6:13 am

or if you actually want to get your parts...

http://www.ebay.com/itm/LAMBRETTA-LI-15 ... 631wt_1037
Cheers,
Geoff
User avatar
Tuna Cowboy
Forum Moderator
 
Posts: 4976
Joined: Mon May 01, 2006 6:21 pm
Location: Eugene, Or

Re: Lambroken

Postby spiderwebb » Sun Jun 03, 2012 10:11 am

User avatar
spiderwebb
 
Posts: 2661
Joined: Fri May 25, 2007 3:15 pm
Location: Eugene, OR

Re: Lambroken

Postby joe » Sun Jun 03, 2012 5:04 pm

spiderwebb wrote:offer 150.oo
you will love it...!!
http://scoot.net/classifieds/forsale.html?id=36454
Image


thanks will, I'll pass on that for now. my electronics are working well.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8241
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Next

Return to Scooter Workshop

Who is online

Users browsing this forum: No registered users and 2 guests

cron