Vespatronic for the GS160

If you're having a problem with your scoot, drop us a line!

Moderator: Tuna Cowboy

Vespatronic for the GS160

Postby joe » Mon Mar 30, 2015 11:14 pm

Dave, let's talk vespatronic for the GS160. SIP has two kits

http://www.sip-scootershop.com/en/produ ... r_50004200

non vespatronic version
http://www.sip-scootershop.com/en/produ ... +_50013100

you mentioned build our own...
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8235
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Vespatronic for the GS160

Postby Dave » Tue Mar 31, 2015 4:27 pm

According to JJ nothing beats a Vespatronic, and I think he is correct. There are two kits for a 160 , the early has the small dia taper and the later and ss has the larger taper. Do you have access to the end of the crank shaft to check or you could make an expensive booboo. The other is a generic based on the "P" maybe.
English Dave
User avatar
Dave
 
Posts: 699
Joined: Wed Nov 08, 2006 10:13 pm

Re: Vespatronic for the GS160

Postby joe » Wed Apr 01, 2015 11:26 pm

we'll bust open my motor, look at the existing GS parts, look at the SS parts, figure out what I need and decide which to go with.
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8235
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Vespatronic for the GS160

Postby Dave » Fri Apr 03, 2015 9:17 pm

If you need a sidekick for it let me know. I have some usefull info ands will make myself available
English Dave
User avatar
Dave
 
Posts: 699
Joined: Wed Nov 08, 2006 10:13 pm

Re: Vespatronic for the GS160

Postby joe » Mon May 25, 2015 5:49 pm

popped the flywheel off.

here's the crank. where should I measure to determine the taper? VIN is 0043431

Image
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8235
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Vespatronic for the GS160

Postby Dave » Mon May 25, 2015 6:30 pm

Diameter at top of taper and diameter at bottom of taper
English Dave
User avatar
Dave
 
Posts: 699
Joined: Wed Nov 08, 2006 10:13 pm

Re: Vespatronic for the GS160

Postby Dave » Mon May 25, 2015 6:49 pm

Should be 21 mm at top and 18 at bottom (or near there, I was eyeballing it 0 part number 50004200 from SIP
English Dave
User avatar
Dave
 
Posts: 699
Joined: Wed Nov 08, 2006 10:13 pm

Re: Vespatronic for the GS160

Postby joe » Mon May 25, 2015 11:10 pm

my though too. I'll measure tomorrow and get it ordered by friday. thanks
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8235
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Vespatronic for the GS160

Postby joe » Wed Jun 03, 2015 10:43 pm

vespatronic ordered. going to strip the motor down this weekend
____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8235
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon

Re: Vespatronic for the GS160

Postby joe » Thu Jul 23, 2015 10:52 am

____________________________________
Friends Don't Let Friends Ride Tupperware
User avatar
joe
Site Admin
 
Posts: 8235
Joined: Tue Apr 25, 2006 10:06 pm
Location: Sunny Eugene, Oregon


Return to Scooter Workshop

Who is online

Users browsing this forum: Baidu [Spider] and 3 guests

cron